EntryNav2 / EntryEvo Apple CarPlay + Fullscreen Activation - No WiFi Needed, DIY for BMW & Mini EntryNav2 / EntryEvo Apple CarPlay + Fullscreen Activation - No WiFi Needed, DIY for BMW & Mini

EntryNav2 / EntryEvo Apple CarPlay + Fullscreen Activation - No WiFi Needed, DIY for BMW & Mini

£99.99
£99.99

Apple CarPlay and Fullscreen, activated natively inside your car's own EntryNav2 / EntryEvo head unit — and now it runs over a plain USB cable , so a missing WiFi port or antenna is no longer the end of the road.

Key features

  • Native Apple CarPlay — on the factory iDrive screen, controlled with the iDrive knob and your steering wheel buttons. Not screen mirroring, not an aftermarket box.
  • Fullscreen included — CarPlay fills the display instead of sitting in the split-screen panel. No separate add-on to buy.
  • Works without WiFi — connect your iPhone with a USB cable. No WiFi port, no antenna, no taking the unit out of the dash.
  • Wireless as well — if your unit has a WiFi antenna fitted, you can use wireless instead. You pick the connection type in the iDrive menu.
  • Fully in-house — our own activation and our own installer app. No third-party FSC codes, no donor codes, no activation module.
  • Nothing else is touched — your existing codings and services are unaffected.
  • DIY, about 2–3 minutes — one click in our installer, with step-by-step instructions.

No WiFi port? No antenna? It still works

Until now, Apple CarPlay on an EntryNav2 / EntryEvo needed the head unit's WiFi antenna. If your unit had no WiFi port at all, every seller gave you the same answer: not compatible, buy a different head unit.

That is no longer true. This activation runs CarPlay over the USB cable :

Your head unit What you get
No WiFi port at all CarPlay over a USB cable
Has a WiFi port, no antenna fitted CarPlay over a USB cable — no need to strip the dash to fit an antenna
WiFi antenna already fitted Both — switch between USB and wireless in the iDrive menu

Enter your VIN above and the checker tells you exactly which connection types your car supports.

Firmware requirement

Your head unit needs firmware 19-11 or newer . The compatibility checker reads this from your VIN, so you know before you buy.

Older firmware is not a dead end. Add our W-Flasher firmware update to your order using the dropdown above — our own one-click tool that brings the unit up to a supported version first. No workshop visit, no dismantling.

What you need

  • A Windows laptop (64-bit) or a Mac (macOS 15 or newer)
  • An ENET cable — on a Mac, also a USB-to-Ethernet adapter
  • A stable internet connection on the laptop during the installation
  • The car running, laptop plugged in and connected, for the 2–3 minutes it takes
  • An iPhone and its USB cable for the wired connection

How installation works

  1. Order, and we send your 8-character activation code. It is tied to your VIN.
  2. Download our installer for Windows or Mac.
  3. Start the car, connect the laptop with the ENET cable, press Detect car .
  4. Enter your activation code and press Start . The unit restarts itself when it finishes.
  5. In the car, open ConnectedDrive > CarPlay Settings and choose wired or wireless.

Need to reinstall or update later? Same car, same code — just run the installer again.

Which cars are compatible

This is for the EntryNav2 head unit — also called EntryNav 2 , EntryNav EVO , EntryEvo or ENAVEVO . Same unit, different names, with the 6.5" or 8.8" screen and WAY map format. It covers both BMW and MINI .

It is not for NBT EVO ID5/ID6 units — those have their own CarPlay activations, and the VIN checker will point you to the right one.

Navigation is not required. A car with no maps installed can still run CarPlay.

Why OEMNAVIGATIONS

  • Developed in-house , start to finish — both the activation and the installer are ours.
  • No third-party or donor FSC codes , and no activation module to buy.
  • No interference with your other codings.
  • The USB route is ours alone — we know of no other seller who can activate CarPlay on a unit with no WiFi port.

Frequently asked questions

Is this real Apple CarPlay or screen mirroring?
Real CarPlay, running natively in the factory head unit on the original screen, with iDrive and steering wheel controls.

My unit has no WiFi port. Can I really use CarPlay?
Yes — that is exactly what this version is for. It runs over a USB cable, so no port and no antenna are needed.

Do I need to remove the head unit?
No. Everything is done through the car's OBD socket with an ENET cable.

Is Fullscreen included?
Yes. Fullscreen is activated together with CarPlay, so you do not need the separate add-on.

What if my firmware is older than 19-11?
Add the W-Flasher firmware update to your order. It updates the unit in one click, then the activation goes on as normal.

Do I need a Windows PC?
No. The installer runs on Windows (64-bit) and on macOS 15 or newer. On a Mac you also need a USB-to-Ethernet adapter for the ENET cable.

Can I move it to another car later?
No. The activation code is tied to your VIN and will not work on a different vehicle.

Does it work on MINI as well as BMW?
Yes, both.

How do I know if my car fits?
Enter your VIN in the compatibility checker above. It confirms the head unit, reads your firmware, and tells you whether you get USB only or USB and wireless.

© 2026, OEMNAVIGATIONS
https://oemnavigations.com